Straight Surgical Peripheral Guiding Catheter

Indications:

Guiding Catheters are intended for use for intravascular  introduction of interventional/diagnostic devices into coronary  or peripheral vascular systems

Features:

• Flat-wire-braided, 100-cm catheter shaft with PTFE liner

• One-piece molded hub and strain relief

• Curves designed for transradial access

• Radiopaque for fluoroscopic visualization

• All catheters available in 100-cm length

• Soft, radiused tip

Specification:

Recommended Procedure

1) Remove the guiding catheter from its packaging using
sterile techniques.
2) Flush the guiding catheter lumen with a heparinized
saline solution.
3) Appropriate anticoagulation and vasodilation therapy
should be used.
4) Introduce the guiding catheter into the vasculature through
the catheter sheath introducer, and/or over an indwelling
guidewire using a percutaneous entry technique of choice.
5) Under fluoroscopic guidance, advance the guiding catheter over
the guidewire or introducer until the desired position is attained.
6) Remove the guidewire prior to introduction of other
intravascular devices or infusion of contrast agents.